sintered product中文是什么意思

• 烧结制品

• sinter    n. 1.【地质学；地理学】泉华〔矿泉四周沉淀的结晶岩石 ...
• product    n. 1.产物，产品；制品；产量；出产。 2.结果，成果 ...
• commercial sintered bronze product    工业烧结青铜制品
• commercial sintered product    工业烧结制品
• porous sintered product    多孔烧结制品; 多孔烧制品
• sintered alnico product    烧结铝镍铁制品
• sintered aluminium product    烧结铝制品
• sintered brass product    烧结黄铜制品
• sintered ferrous product    烧结铁制品
• sintered metal product    粉末冶金制品; 烧结金属制品
• sintered nickel product    烧结镍制品
• sintered powder metal product    粉末冶金制品
• sintered-aluminum product    烧结铝制品
• sintered    绕结的热压结的; 烧结的
• sintered absorbent    烧结吸收剂
• sintered aggregate    烧结骨料; 陶粒集料
• sintered alloy    粉末合金; 粉末冶金合金; 烧结合金
• sintered alumina    烧结氧化铝
• sintered aluminium    烧结铝
• sintered article    烧结制品
• sintered ash    粘结灰
• sintered bar    烧结棒; 烧结锭条
• sintered basalt    烧结玄武岩
• sintered bauxite    烧结铝矾土
• sintered bearing    烧结合金轴承; 烧结轴承

• Powder metallurgy . determination of the oil content of porous sintered products
  粉末冶金.多孔烧结制品中油含量的测定
• Metallographe stadard specifications for powder metallurgy iron - based sintering products
  铁基粉末冶金烧结制品金相标准
• Permissible deviations in dimensions without tolerance indication for metallic sintered products
  无公差指示的金属烧结产品的尺寸允许偏差
• Powder metallurgy . sintered metal materials , excluding hardmetals . determination of hardness . part 3 : sintered products hardened on a surface by other treatments than in nf a 95 - 321 - 2
  粉末冶金.硬质合金除外的烧结金属材料.硬度的测定.第3部分:除在nfa 95 321 - 2中表面硬化处理以外的烧结产品
• Some tests for liangang sinter adding bos slag have be done in the laboratory and plant trial . the results show that in the range of bos slag percentage , from 0 % to 8 % , with the increase of bos slag percentage , the sinter speed has been lower , but the sinter strength and productivity of sinter product have been higher , the sinter productivity will be the maximum when bos slag percentage is 4 % ; the siner reducibility has been improved , the normal operation of bof will not be effected anymore because of the circulation of p form bos slag
  对烧结矿配加转炉钢渣进行了实验室研究和工业试验，在钢渣配比0 % 8 %的范围内进行的研究表明：随着钢渣配比的增加，烧结速度稍有下降，烧结矿强度、烧结成品率均有所提高，利用系数在4 %左右时达到最大值；烧结矿还原性得到改善；钢渣中带入的p的循环富集不会影响炼钢的现行操作。

• sintered productとは意味：焼結製品｛しょうけつ せいひん｝